Gun Window Banner

Preparation

• Avoid touching the adhesive side, as oils from your skin can affect sticking. 
• Always clean and dry the surface before applying the banner.
• Ideal temp: 60°F-80°F (15°C–27°C)
  Below this, lightly heat the surface with a heat gun

Application

1. Place the banner on the windshield and position it where you want it.
2. Use masking tape to hold it in place.
3. Measure both sides to make sure the banner is straight and even.
4. Create a tape hinge in the middle
5. Peel the transfer tape from one side making sure the vinyl stays on the transfer tape.
6. Cut away the exposed backing paper.
7. Apply the banner slowly using a squeegee, working from the center outward.
8. Repeat the same process on the other side.
9. Push out any air bubbles as you apply the vinyl.
10. Slowly remove the transfer tape at a sharp angle.

After Installation

• Do not wash the car for 24–48 hours.
• Avoid using the wipers directly over the banner for the first day.
• Avoid pressure washing close to the edges.

• Shipping:
  Shipping times will vary depending on your location and the carrier used. You can find the estimated shipping time for your country here

• Returns:
  In case you receive a damaged product or the product has a manufacturing error can we offer you a free replacement or refund, if you contact us within 30 days of receiving the product.
  
  As each item is made especially for you, we’re unable to accept returns or offer refunds in other cases.